SimpleIPUpstreamMote
Description
The SimpleIPUpstreamMote application works in coordination with the SimpleIPUpstreamMgr application:
It connects to the mote on the supplied COM port
It issues the join command and monitors the mote's state
On reaching operational (4) state, it opens a socket and binds a port to it
It sends the string "Hello, World!" to the manager every 5 seconds.
You can view the packets at the manager using the SimpleIPUpstreamMgr application.
The mote must be in slave mode to use SimpleIPUpstreamMote
Sample Output
SimpleIPUpstreamMote (c) Dust Networks
SmartMesh SDK 1.0.6.139
Note: Use with SimpleIPUpstreamMgr
- create the variable 'moteconnector'
- connect to the mote's serial port
Enter the serial API port of SmartMesh IP Mote (e.g. COM15): COM50
- have the mote join and wait until it reaches operational state
current mote state: 1
current mote state: 2
current mote state: 2
current mote state: 2
current mote state: 2
...
current mote state: 2
current mote state: 3
current mote state: 4
current mote state: 4
current mote state: 4
current mote state: 4
current mote state: 4
current mote state: 4
current mote state: 5
- setup a socket
- request a service
- publish Hello, World! every 5s
Just sent "Hello, World!", next transmission in 5s
Just sent "Hello, World!", next transmission in 5s
...