Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Current »

Expected completion time of this lab: 30 min

  • You can issue any (raw) serial API command to the manager by issuing:

  • issue a getNetworkConfig command.

  • What is the networkId of your SmartMesh IP Manager?

    Answer 1:

     

  • What is the maximum number of motes it supports?

    Answer 2:

     

  • Issue a getNetworkInfo command.

  • What is the number of motes currently in your network?

    Answer 13.3:

     

  • Using the getPathInfo command, verify the quality of a link between one of your motes and the manager (you can get the MAC addresses using the “sm” command in CLI). Fill in the following table:

    The payload for the getPathInfo command contains fields:

    {
    "manager": 0,
    "command": "getPathInfo",
    "fields": {
        "source": "00-17-0d-00-00-38-06-45",
        "dest": "00-17-0d-00-00-38-03-dd"
    }
}


    Answer 13.4:

    source MAC addressdestination MAC addressquality
       

     

  • No labels