SmartMesh IP mote
Take a SmartMesh IP mote of your kit and switch the “POWER” switch in the ON position. How many LEDs are blinking?
Answer 1:
While the SmartMesh IP mote is on, remove the blue jumper labeled “LED EN” (for LED enabled). Verify that the LED doesn’t blink.
Reposition the blue jumper on the “LED EN” pins, verify that the LEDs blink.
Put the power switch in the OFF position.
SmartMesh IP manager
Take the SmartMesh IP Manager out of your SmartMesh IP Starter kit.
Plug it into your computer or switch it on. What LED goes on?
Answer 2: