Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 23 Next »

Expected completion time of this lab: 10 min.

SmartMesh IP mote

  • Take a SmartMesh IP mote of your kit and switch the “POWER” switch in the ON position. How many LEDs are blinking?  

    Answer 1:


  • While the SmartMesh IP mote is on, remove the blue jumper labeled “LED EN” (for LED enabled). Verify that the LED doesn’t blink. 
  • Reposition the blue jumper on the “LED EN” pins, verify that the LEDs blink. 
  • Put the power switch in the OFF position.

SmartMesh IP manager

  • Take the SmartMesh IP Manager out of your SmartMesh IP Starter kit.  

  • Plug it into your computer. What LED goes on?

    Answer 2:




  • No labels