Info | ||
---|---|---|
Expected completion time of this lab:
. |
Table of Contents |
---|
Tip |
---|
Make sure you are subscribed to notifications! |
Wait for Create the following flow
After a few seconds until , you receive both an "oap" notifications and a notification. What does it contain?
Info title Answer 16.1: Fill in the table below with the notification you have just received"notifData" notification. These correspond to the same information: the manager publishes the (raw) "notifData" notification, the JsonServer then understands that this is an OAP notfication and parses that.
In the "notifData" notification, find
fields.data
field. First, copy-paste the bytes in the notification into the from that field "value received" column below. Second, use the tools guide SmartMesh IP Tools Guide (http://www.linear.com/docs/42453), Section 9 “On-Chip Application Protocol” to interpret those bytes and fill in the "explanation" column.Info icon false title Answer 16.21: field name
length
value received
explanation
control byte
1 byte
N.A.
id byte
1 byte
N.A.
command
1 byte
type
1 byte
channel
type
1 byte
length
1 byte
value
1 byte
timestamp
12 bytes
rate
4 bytes
num samples
1 byte
sample size
1 byte
sample
2 bytes
Tip The “On-Chip Application Protocol” (OAP) is specified in the SmartMesh IP Tools Guide (http://www.linear.com/docs/42453), Section 9 “On-Chip Application Protocol”.
What is the reported temperature?
Info icon false title Answer 16.32: