View Source

Expected completion time of this lab:

15 min

.

Create the following flow
After a few seconds, you receive both an "oap" notifications and a "notifData" notification. These correspond to the same information: the manager publishes the (raw) "notifData" notification, the JsonServer then understands that this is an OAP notfication and parses that.

In the "notifData" notification, find fields.data field. First, copy-paste the bytes from that field "value received" column below. Second, use the SmartMesh IP Tools Guide (http://www.linear.com/docs/42453), Section 9 “On-Chip Application Protocol” to interpret those bytes and fill in the "explanation" column.

field name		length	explanation
control byte		1 byte	N.A.
id byte		1 byte	N.A.
command		1 byte
type		1 byte
channel	type	1 byte
	length	1 byte
	value	1 byte
timestamp		12 bytes
rate		4 bytes
num samples		1 byte
sample size		1 byte
sample		2 bytes

What is the reported temperature?