| Info |
|---|
This application was added in SMSDK 1.0.5. |
Introduction
TempLogger is a command-line (non graphical) tool that logs OAP temperature measurements from SmartMesh IP motes running in master mode.
It connects to:
- The SmartMesh IP Manager
- (Over the air) The SmartMesh IP Mote running in master mode - this is the default mode for motes in an evaluation kit.
Running
You can run the TempLogger application:
- by double-clicking on the Windows executable at
/win/TempLogger.exe - by double-clicking on its source files at
/src/bin/TempLogger/TempLogger.py(may require additional steps on non-windows OSes)
Description
Start the TempLogger application, and follow the command prompt. Once you have entered the serial port of your SmartMesh IP manager, the TempLogger application will display the temperature readings it receives from the motes.
| No Format |
|---|
TempLogger - (c) Dust Networks
SmartMesh SDK 1.0.5.138
SmartMesh IP manager's API serial port (leave blank for COM15): COM15
Connected to COM15.
t=19.00C at 00-17-0d-00-00-38-07-0c
t=25.21C at 00-17-0d-00-00-38-03-ca
t=24.36C at 00-17-0d-00-00-38-06-c9
t=24.79C at 00-17-0d-00-00-38-04-35
t=19.00C at 00-17-0d-00-00-38-07-0c
t=25.42C at 00-17-0d-00-00-38-03-ca
|