...
- Switch on all motes and managers.
- Issue a search command. Once this command is issued, your mote starts listening for beacons from the different SmartMesh IP networks around it. Each time it hears one, it issue issues a notification, which is printed on the APIExplorer application.
Fill in the following table with the notifications you receive (avoid putting notifications with the same netId and moteId twice):
Info icon false title Answer 21.1: netId moteId rssi joinPri Tip This search mechanism is useful for a node mote to choose which network to join. When it has found a network it wishes to join, the node mote first needs to change its netid to match that of the network. In your case, you will NOT do this, since you will join your own SmartMesh IP managerManager.
Tip The netid NOT a secret, i.e. it is not a security mechanism. When a mote joins, it needs to have a "join key" (a 16-byte number) which matches that on the manager. So hearing a network through the search mechanism does NOT mean the mote can join that network.
- the The only way to leave the search mode is by resetting the mote. Issue a reset command. After issuing this command, it takes the mote 5 seconds to reset. The mote has reset when you receive a notification with the “events” field set to “1 (boot)”
...