...

See the temperature data published by the motes

• Connect you your SmartMesh IP manager Manager to your computer.

• Turn your SmartMesh IP manager Manager on.

• Turn on all your motes, and what wait for them to join your manager.

• In the TempMonitor application, select “network type: SmartMesh IP” and click “load”.

• In the “manager connection” frame, in the “port name” field, enter the API port of your SmartMesh IP managerManager. A table appears which lists the motes in your network

• what What are the temperatures of your motes?
  

  Info
  icon false title Answer 10.1:

   

   

• Compare that to other groups.

• Place a mote on a hot/cool area and make sure the reported temperature changes.

Get the publish rate

• get Get the current publish rate of a mote by pressing the "get" button. What is the default value?

  Info
  icon false title Answer 10.2:

• Verify that value with your stopwatch.

Set the publish rate

• using Using the "set" button, configure the mote to publish a temperature reading every 5 s.
• After a couple of minutes, make sure this mote published more publishd more data than the others other motes in the network.

Toggle the blue LED of your motes

• using Using the "toggle led" button, make sure you can toggle the status LED on all motes.