...
Expected completion time of this lab:
| Excerpt |
|---|
30 min |
"Pinging" a device is a general networking term. When issuing a ping command, your computer sends an “echo” packet to the computer you specify, and waits for a reply. This allows you to (1) verify that the device is present in the network and (2) measure the latency for the packet to go back and forth. The same functionality is implemented in SmartMesh IP.
- Make sure all motes have joined the manager.
On the SmartMesh IP Manager, enter the following commands to list all the mote ids
Code Block login user sm
| Tip | ||
|---|---|---|
| ||
What is the different between MAC address and mote id? |
For each mote id, enter the following command:
Code Block > ping <mote_id>
Note Mote id 1 is always the SmartMesh IP Manager, which you cannot ping
Fill in the table below:
Info icon false title Answer 1:
| mote id | latency (in ms) | voltage (mV) | temperature (C) |
|---|---|---|---|
| 2 |
...
| 3 |
...
...
| 4 |
...
...
| 5 |
...