...
Connect your SmartMesh IP Manager to your computer.
Turn your SmartMesh IP Manager on.
Turn on all your motes, and wait for them to join your manager.
In the TempMonitor application, select “network type: SmartMesh IP” and click “load”.
In the “manager connection” frame, in the “port name” field, enter the API port of your SmartMesh IP Manager. A table appears which lists the motes in your network
What are the temperatures of your motes?
Info icon false title Answer 10.1: Compare that to other groups.
- Place a mote on a hot/cool area and make sure the reported temperature changes.
...
- Using the "set" button, configure the mote to publish a temperature reading every 5 s.
- After a couple of minutes, make sure this mote published more data than the other motes in the network.
...
| Tip |
|---|
At the end of this lab, revert all motes to publishing at their default rate. |
...