...
Connect a USB cable between your computer and your manager. Open your Device Manager (if you're on Windows) and write down the serial ports that have appeared.
Connect a second USB cable to your mote.
You should be able to write down the serial port numbers in the table below
manager | mote | |
---|---|---|
first serial port | ||
second serial port | ||
third serial port | ||
fourth serial port |
Answer 1
Tip |
---|
Crash Course: Why 4 serial ports, and which one do I use? You will be connecting to the third and fourth serial port:
|
Software Version on your Manager
Open a serial terminal, connected to the CLI port of your SmartMesh IP manager (the third one). Use a Serial Terminal such as TeraTerm or Putty. Make sure you use serial type communication, and, once connected, make sure you see carets “>” when typing Enter
type in the following commands:
Code Block login user show ver
What is the version of the firmware running on your SmartMesh IP manager?
...