Expected completion time of this lab:
. |
Unlike the other lab, the instructions of this lab are not step-by-step. They should rather be considered as a reference; your instructor will guide the work during this lab. |
You are called in by a building manager who wants to turn his building into a "Smart Building". She wants to deploy a number of low-power wireless motes around her building, connected to sensors and actuators. She wants to be able to dynamically (re)configure the interactions between the nodes. For now, she wants the following interactions:
|
|
By convention, let's connect:
|
Start by building the following circuit:
Through Node-RED, communicate with your mote to:
enable the digital input
enable “on-change” notifications
Verify that you see notifications with different values.
By convention, let's connect the buzzer to GPIO digital_out/D4 (DC9003 pin I_MOSI) |
Start by building the following circuit:
Through APIExplorer, communicate with your mote to switch the buzzer on/off.