...
- Close theĀ
PkGen
application if case it's still open. - Open theĀ
APIExplorer
application, and connect to the SmartMesh IP Manager. Issue the subscribe command with the following parameters to receive notifications:
filter ffffffff
unackfilter 00000000
Tip The "filter" and "unackfilter" fields contain a bitmap of notifications to enable. This is detailed in the SmartMesh IP Manager API guide. What this commands means is "subscribe to all types of notifications".
- At this point, you will see all notifications from all motes (for example temperature readings).
- To avoid gettng confused by the amount of getting too many notifications, switch off all the motes except one for the following labs.
...