...
- Using two devices, first set one up as a receiver using dn_loc_testRadioRxCmd. Set the other one up to transmit a certain number of packets using dn_loc_testRadioTxCmd. After all packets have been sent, the statistics on the receiver can be queried to see how many were successfully received. This setup can be used to evaluate range by repeating the test over several known distances, or to verify top-level assembly in manufacturing.
- For certification, the tests will not care how many packets are received, but rather just the quality of the transmitted signal. In this case, a single device transmitting using dn_loc_testRadioTxCmd is sufficient.
...