...
Several
Include Page | ||||
---|---|---|---|---|
|
Kit | DC9000A | DC9000B | DC9021A |
---|---|---|---|
Manager (qty. 1) | DC9001A (no longer available) | (formerly shipped with DC9001B) | (formerly shipped with DC9020A) |
---|
Mote (qty. 5) | DC9003A-B | DC9003A-B | DC9018A-B |
---|---|---|---|
Interface | DC9006A | DC9006A | DC9006A |
maximum | 32 motes | 100 motes | 100 motes |
Antenna | chip antenna | chip antenna | chip antenna |
Note |
RF certified |
Include Page | ||||
---|---|---|---|---|
|
...
In addition, the following Eval/Dev boards (not included in any
Include Page | ||||
---|---|---|---|---|
|
Part | DC9020B | DC9018B-B |
---|---|---|
Description | SmartMesh IP Manager, 100 mote capacity | SmartMesh IP Mote |
Antenna | MMCX antenna connector | MMCX antenna connector |
Note | RF certified | RF certified |
SmartMesh IP Modules
The following modules are available, as is the QFN chip:
Part | LTP5901-IPMAxxx#PBF | LTP5902-IPMAxxx#PBF |
---|---|---|
Form Factor | 66-pin castellated module | 66-pin castellated module |
Antenna | chip antenna | MMCX antenna connector |
Note | RF certified | RF certified |
Include Page | ||||
---|---|---|---|---|
|
SmartMesh IP Chip
Part | LTC5800-IPM#PBF |
---|---|
Form Factor | single chip SOC |
Packaging | QFN package |
Anchor | ||||
---|---|---|---|---|
|
...
The pictures below illustrate the use of two popular debug probes:
...
Programming Adapter
The DC9004A Programming Adapter enables the DC9006A Interface card to connect to the recommended programming header (2x5 2mm pitch header) on a customer board to program an Eterna chip or PCB module or to communicate via CLI.
DC9004A Programming Adapter |
---|
Next Step: Run the code (finally!)
...