...
- The AP Bridge binaries are installed in APC_HOME/bin.
- The AP Bridge software reads its configuration from APC_HOME/conf.
- The AP Bridge generates log files toto APC_HOME/logs. Log files are automatically rotated when they reach a certain size.
- The AP Bridge writes certain runtime information to APC_HOME/var/run.
Network connectivity
If the system is being built with APs physically separated from the VManager system, then the simplest implementation is to connect all the devices to the same Ethernet network. Any method that provides a reliable TCP/IP connection between the APs and VManager can be used including WiFi, or cellular. The network connectivity must be consistent and reliable so that the APs can communicate constantly with the VManager. The VManager will consider an AP to be lost if its connectivity is interrupted for 30 seconds. In the event that an AP is lost, the VManager will immediately reassign all mote paths through the remaining APs and motes that are only connected through the lost AP may be lost as well. If the AP returns later on, then the VManager will slowly re-integrate the AP into the network topology through normal optimization cycles.
...