Select Slave ModeAnchor sec_moteSlave sec_moteSlave
| sec_moteSlave | |
| sec_moteSlave |
| Gliffy | ||||
|---|---|---|---|---|
|
| Anchor | ||||
|---|---|---|---|---|
|
Figure 1: DC9003 mote board (left) connected to a computer via the DC9006 interface board (center).
...
MCU
| Mote | ||||||
|---|---|---|---|---|---|---|---|
| 3.3 V | VBAT | ||||||
| Ground | GND | ||||||
| UART TX | RX | ||||||
| UART RX | TX |
Table 2: MCU to mote pin mapping.
Name
| Pin # | Name | |||||||
|---|---|---|---|---|---|---|---|---|---|
| TX CTSn | 1 | 2 | TX RTSn | ||||||
| TX | 3 | 4 | GND | ||||||
| RX | 5 | 6 | RX RTSn | ||||||
| RX CTSn | 7 | 8 | CO TX | ||||||
| CO RX | 9 | 10 | GND | ||||||
| RESETn | 11 | 12 | F P ENn | ||||||
| I MISO | 13 | 14 | I MOSI | ||||||
| I SSn | 15 | 16 | I SCK | ||||||
| GND | 17 | 18 | TCK | ||||||
| TMS | 19 | 20 | TDO | ||||||
| TDI | 21 | 22 | VUSB_3V6 | ||||||
| PGOOD | 23 | 24 | GND | ||||||
| VBAT | 25 | 26 | KEY | ||||||
| EHORBAT | 27 | 28 | RSVD | ||||||
| I/O 1 | 29 | 30 | I/O 2 | ||||||
| V+ | 31 | 32 | +5V | ||||||
Table 3: DC9003A (mote) P1 Pins
...